INITIAL CARE
Apply a coat of Hartco "Pattern-Plus Shine" with lamb's wool
applicator or sponge mop. Let dry--no buffing required.
ROUTINE CARE
Sweep, vacuum, or dust mop regularly to keep clean. Wipe up spills
or spots with a damp cloth or sponge using Hartco "Easy Clean." As needed
apply Hartco "Pattern-Plus Shine and let dry.
RECONDITIONING
To renew color in small scratched or worn areas apply Hartco "Spray
Tone" and buff with a soft cloth. Once the color has been enriched and
the "Spare Tone" has thoroughly dried, apply Hartco "Pattern-Plus Shine
as per the directions on the label.
PREVENTIVE MAINTENANCE
1. Avoid walking on the floor with worn out spike heels.
2. Vacuum often and sweep or dust mop.
3. Never damp mop with water. This practice will permanently damage the floor.
4. Mats at all entrances will help keep dirt and moisture from being tracked in. Also, area rugs are recommended under sinks and in the galley area.
5. Use floor protectors under heavy furniture to help reduce the risk of indentation.
SOLUTIONS TO COMMON PROBLEMS
Floor Spills--Clean promptly with Hartco "Easy Clean."
White Spots--Excess wax can cause "white spots." These spots can be
removed with Hartco "Wipe Clean." If Hartco "Pattern-Plus Shine has
been applied use a cloth to apply a small amount of it and rub hard to
remove the spots. Reapply "Pattern-Plus Shine."
Scratches--To repair light scratches or color loss apply Hartco "Spray
Tone." For deep scratches abrade the area lightly with 00 steel wool
or #220 grit sandpaper, then apply "Spray Tone."
Rubber Heel Marks, Crayons, or Gum--Dampen a clean clothwith Hartco "Wipe Clean" and
rub away the problem.
This material was provided by Michael Packard, Director of Warranty and service, Foretravel, Inc.